Mell What is the default subnet mask for a class B network Mcq?
We know that the default mask of a class B network is 255.255. 0.0.
What is the class full subnet mask for a class B network?
Two IPv4 addresses in each subnet are used to represent the network address and directed broadcast address (first and last IPv4 addresses in a subnet block). The subnet mask to use for 2-bit subnetting for a Class B network is 255.255. 192.0.
What is a class B network?
A class B network is a type of network in the now-defunct classful networking architecture. Class B networks have IP addresses between 128.0. 0.0 and 191.255. 255.255. The Classful networking system has been superseded by CIDR (Classless Inter-Domain Routing) since 1993.
What is the default subnet mask for a class B network quizlet?
The default subnet mask for a Class B is 255.255. 0.0. It supports up to 16,384 networks, and 65,536 hosts per network.
What is the first broadcast address for a 17 class B network?
First, check what will be network address of this IP Address. That will be 172.35. 0.0 (because in class B two octets are reserved for networks and two for hosts.) CIDR = 17 that means subnet Mask = 255.255.
What is the default sub-net mask for a Class B address?
Class B networks use a default subnet mask of 255.255.0.0 and have 128-191 as their first octet. The address 172.16.52.63 is a class B address. Its first octet is 172, which is between 128 and 191, inclusive.
What is the difference between a subnet and a subnet mask?
A subnet is a range of addresses which are valid hosts on the same network. Subnet and network range are synonyms. A subnet mask is an obsolete term for “network mask”. “subnet” no longer exists. It is a leftover from classful days. “network” can be used in place of “subnet” for almost all uses (if not all).
What is gateway subnet mask?
The subnet mask is a sort of template that defines the range of addresses available for your network segment. The default gateway is the where all traffic with an IP address that does not fit your network address is sent (usually a router of some sort, connected to the internet).
What is a Subnet class?
Subnet class. Represents a specific subnet in the network to which servers and workstations are attached.
Class B networks use a default subnet mask of 255.255.0.0 and have 128-191 as their first octet. The address 172.16.52.63 is a class B address. Its first octet is 172, which is between 128 and 191, inclusive.
A subnet is a range of addresses which are valid hosts on the same network. Subnet and network range are synonyms. A subnet mask is an obsolete term for “network mask”. “subnet” no longer exists. It is a leftover from classful days. “network” can be used in place of “subnet” for almost all uses (if not all).
The subnet mask is a sort of template that defines the range of addresses available for your network segment. The default gateway is the where all traffic with an IP address that does not fit your network address is sent (usually a router of some sort, connected to the internet).
Subnet class. Represents a specific subnet in the network to which servers and workstations are attached.